产品中心

                    多功能工具机

                    0.00
                    0.00
                    产品型号:
                    产品编号:
                      




                    主要规格和技术参数 

                    AT520
                    AT750
                    床身上最大回转直径
                    300mm
                    300mm
                    两顶尖距离
                    500mm
                    750mm
                    主轴通孔直径
                    26mm
                    26mm
                    主轴转速
                    160-1600r/min
                    160-1600r/min
                    主轴锥度
                    NO.4
                    NO.4
                    刀架最大移动行程
                    80mm
                    80mm
                    工作台最大横向行程
                    200mm
                    200mm
                    公制螺纹
                    0.5-3mm
                    0.5-3mm
                    英制螺纹
                    11-40 1/n""
                    11-40 1/n""
                    尾座锥度
                    NO.3
                    NO.3
                    尾座套筒行程
                    50mm
                    50mm
                    电机功率
                    0.55kw
                    0.55kw
                    最大钻削范围
                    20mm
                    20mm
                    最大盘铣范围


                    最大立铣范围


                    主轴转速
                    315-2000r/min
                    315-2000r/min
                    主轴锥度
                    NO.3
                    NO.3
                    主轴行程
                    80mm
                    80mm
                    主轴端面至工作台距离
                    240-320mm
                    240-320mm
                    工作台尺寸
                    425*150
                    425*150
                    钻铣头垂直回转
                    360
                    360
                    电机功率
                    0.37kw
                    0.37kw
                    净重
                    230kg
                    270kg
                    外形尺寸
                    1100*550*740
                    1350*550*740
                    Features 

                    ◆ Compact, versatile combination machine. 
                    ◆ Adjustable height drill/mill head increases capacity. 
                    ◆ Large MT4 spindle bore. 
                    ◆ Fine feed handle and clutch for precision milling. 
                    ◆ Headstock provides two step of feeds. 
                    ◆ Spindle is supported by high precision bearing. 
                    ◆ Headstock is constantly oiled during operation. 
                    ◆ T-slot cross slide. 
                    ◆ Adjustable gibs for the slideway. 
                    ◆ Power longitudinal & cross feed. 
                    ◆ Gearbox gets left and right hand threads to cut. 
                    ◆ High precision chuck. 
                    ◆A combination switch 
                    ◆ Tailstock may be offset for turning taper. 


                    Threading Dial & Half Nut 
                    It can be realized power feed on longitudinal or crosswise. 
                    cut and chase threads like a master machinist. you can cut right-and left-hand threads in metric and inch. 


                    Bi-directional power-feed 
                    No stop to realized the functions of positive and negative on the lathe. leadscrew & crossfeed screw on both lathe and mill-yield finish of highest quality work 


                    Two separate motors 
                    This machine is multi-purpose machine tool of bench type, it is mainly used to lathe, drill and mill. which controlled by two motor. 


                    Quick Changeover 
                    Bigger mill clearance allows room for both lathe and mill setups without removing the lathe chuck.

                    产品详情:
                    大利彩票