简体中文
English
产品中心
|
主要规格和技术参数 |
|
|
车削 |
AT320 |
|
机身上最大工件回转直径 |
320mm |
|
最大工件长度 |
750mm |
|
刀架上最大回转直径 |
200mm |
|
主轴通孔直径 |
38mm |
|
主轴孔莫氏锥度 |
NO.5 |
|
刀架最大横向行程 |
150mm |
|
小刀架最大纵向行程 |
100mm |
|
加工公制螺纹种数 |
21 |
|
加工公制螺纹螺距 |
0.45-6mm |
|
加工英制螺纹种数 |
28 |
|
加工英制螺纹螺距 |
5-48 1/n" |
|
主轴每转刀架的纵向进给量 |
0.01-1.5/r |
|
主轴每转刀架的横向进给量 |
0.025-0.34/r |
|
尾架套筒的最大移动量 |
80mm |
|
尾架内孔莫氏锥度 |
NO.3 |
|
主轴转速级数 |
12 |
|
主轴转速范围 |
60-1600r/min |
|
电机 |
1.1kw |
|
|
|
|
钻铣削 |
AT320 |
|
最大钻孔直径 |
16mm |
|
钻铣头箱绕立柱回转角度 |
360 |
|
主轴转速级数 |
4 |
|
主轴转速范围 |
260-2620r/min |
|
主轴孔莫氏锥度 |
No.3 or R8 |
|
电机 |
0.37kw |
|
|
|
|
其他 |
|
|
净重 |
400kg |
|
外形尺寸 |
1540*625*1750 |
Features
◆ Compact,versatile combination machine.
◆ Adjustable height drill/mill head increases capacity.
◆ Large MT5 spindle bore.
◆ Large distance between center on longitudinal.
◆ Fine feed handle and clutch for precision milling.
◆ Headstock provides two step of feeds.
◆ Spindle is supported by high precision bearing.
◆ Headstock is constantly oiled during operation.
◆ T-slot cross slide.
◆ Adjustable gibs for the slideway.
◆ Power longitudinal & cross feed.
◆ Gearbox gets left and right hand threads to cut.
◆ High precision chuck.
◆ Equipped with emergency stop button.
◆ A reversion switch is included for added versatility.
◆ Tailstock may be offset for turning taper.
◆ with the added control rod, it is easier to handle.
Gear drive power for lathe
It has 12-garde spindle gearshift for cutting, large spindle holes and large chuck
Threading Dial & Half Nut
It can be realized power feed on longitudinal or crosswise.
cut and chase threads like a master machinist. you can cut right and left-hand threads in metric and inch. with the added control rod, it is easier to handle.
Bi-directional power-feed
No stop to realized the functions of positive and negative on the lathe. leadscrew & crossfeed screw on both lathe and mill-yield finishes,highest quality work.
Gear drive power for mill & drill-It has 4 gearshift for drilling and milling. the drilling and milling head can work with angle changed ?
Induction hardened, precision ground V-way bed
Quick Changeover & Two separate motors
Bigger mill clearance allows room for both lathe and mill setups without removing the lathe chuck. this machine is multi-purpose machine tool of bench type, it
is mainly used to lathe,drill and mill. which controlled by two motor
STANDARD ACCESSORIES
1. 3-jaw chuck
2. dead center
3. allen wrench
4. double open end wrench
5. chuck wrench
6. change gear
7. drill chuck
8. machine base
SPECIAL ACCESSORIES
1. turning tool set
2. steady rest
3. follow rest
4. machine vice
5. face mill cutter
6. face plate
7. back plate(φ160/φ200)
8. four-jaw chuck(φ160/φ200)
9. step block
10. rolling center
◆ Compact,versatile combination machine.
◆ Adjustable height drill/mill head increases capacity.
◆ Large MT5 spindle bore.
◆ Large distance between center on longitudinal.
◆ Fine feed handle and clutch for precision milling.
◆ Headstock provides two step of feeds.
◆ Spindle is supported by high precision bearing.
◆ Headstock is constantly oiled during operation.
◆ T-slot cross slide.
◆ Adjustable gibs for the slideway.
◆ Power longitudinal & cross feed.
◆ Gearbox gets left and right hand threads to cut.
◆ High precision chuck.
◆ Equipped with emergency stop button.
◆ A reversion switch is included for added versatility.
◆ Tailstock may be offset for turning taper.
◆ with the added control rod, it is easier to handle.
Gear drive power for lathe
It has 12-garde spindle gearshift for cutting, large spindle holes and large chuck
Threading Dial & Half Nut
It can be realized power feed on longitudinal or crosswise.
cut and chase threads like a master machinist. you can cut right and left-hand threads in metric and inch. with the added control rod, it is easier to handle.
Bi-directional power-feed
No stop to realized the functions of positive and negative on the lathe. leadscrew & crossfeed screw on both lathe and mill-yield finishes,highest quality work.
Gear drive power for mill & drill-It has 4 gearshift for drilling and milling. the drilling and milling head can work with angle changed ?
Induction hardened, precision ground V-way bed
Quick Changeover & Two separate motors
Bigger mill clearance allows room for both lathe and mill setups without removing the lathe chuck. this machine is multi-purpose machine tool of bench type, it
is mainly used to lathe,drill and mill. which controlled by two motor
STANDARD ACCESSORIES
1. 3-jaw chuck
2. dead center
3. allen wrench
4. double open end wrench
5. chuck wrench
6. change gear
7. drill chuck
8. machine base
SPECIAL ACCESSORIES
1. turning tool set
2. steady rest
3. follow rest
4. machine vice
5. face mill cutter
6. face plate
7. back plate(φ160/φ200)
8. four-jaw chuck(φ160/φ200)
9. step block
10. rolling center
产品详情：