产品中心

                    多功能工具机

                    0.00
                    0.00
                    产品型号:
                    产品编号:
                      


                    主要规格和技术参数 
                    车削
                    AT320
                    机身上最大工件回转直径
                    320mm
                    最大工件长度
                    750mm
                    刀架上最大回转直径
                    200mm
                    主轴通孔直径 
                    38mm
                    主轴孔莫氏锥度
                    NO.5
                    刀架最大横向行程
                    150mm
                    小刀架最大纵向行程 
                    100mm
                    加工公制螺纹种数
                    21
                    加工公制螺纹螺距 
                    0.45-6mm
                    加工英制螺纹种数
                    28
                    加工英制螺纹螺距
                    5-48 1/n"
                    主轴每转刀架的纵向进给量
                    0.01-1.5/r
                    主轴每转刀架的横向进给量
                    0.025-0.34/r
                    尾架套筒的最大移动量
                    80mm
                    尾架内孔莫氏锥度
                    NO.3
                    主轴转速级数
                    12
                    主轴转速范围
                    60-1600r/min
                    电机
                    1.1kw

                    钻铣削
                    AT320
                    最大钻孔直径
                    16mm
                    钻铣头箱绕立柱回转角度
                    360
                    主轴转速级数
                    4
                    主轴转速范围
                    260-2620r/min
                    主轴孔莫氏锥度
                    No.3 or R8
                    电机
                    0.37kw


                    其他
                    净重 
                    400kg
                    外形尺寸
                    1540*625*1750

                    Features 

                    ◆ Compact,versatile combination machine. 
                    ◆ Adjustable height drill/mill head increases capacity. 
                    ◆ Large MT5 spindle bore. 
                    ◆ Large distance between center on longitudinal. 
                    ◆ Fine feed handle and clutch for precision milling. 
                    ◆ Headstock provides two step of feeds. 
                    ◆ Spindle is supported by high precision bearing. 
                    ◆ Headstock is constantly oiled during operation. 
                    ◆ T-slot cross slide. 
                    ◆ Adjustable gibs for the slideway. 
                    ◆ Power longitudinal & cross feed. 
                    ◆ Gearbox gets left and right hand threads to cut. 
                    ◆ High precision chuck. 
                    ◆ Equipped with emergency stop button. 
                    ◆ A reversion switch is included for added versatility. 
                    ◆ Tailstock may be offset for turning taper. 
                    ◆ with the added control rod, it is easier to handle. 


                    Gear drive power for lathe 
                    It has 12-garde spindle gearshift for cutting, large spindle holes and large chuck 


                    Threading Dial & Half Nut 
                    It can be realized power feed on longitudinal or crosswise. 
                    cut and chase threads like a master machinist. you can cut right and left-hand threads in metric and inch. with the added control rod, it is easier to handle. 


                    Bi-directional power-feed 
                    No stop to realized the functions of positive and negative on the lathe. leadscrew & crossfeed screw on both lathe and mill-yield finishes,highest quality work. 


                    Gear drive power for mill & drill-It has 4 gearshift for drilling and milling. the drilling and milling head can work with angle changed  ? 


                    Induction hardened, precision ground V-way bed 


                    Quick Changeover & Two separate motors 
                    Bigger mill clearance allows room for both lathe and mill setups without removing the lathe chuck. this machine is multi-purpose machine tool of bench type, it 
                    is mainly used to lathe,drill and mill. which controlled by two motor 


                    STANDARD ACCESSORIES 
                    1. 3-jaw chuck 
                    2. dead center 
                    3. allen wrench 
                    4. double open end wrench 
                    5. chuck wrench 
                    6. change gear 
                    7. drill chuck 
                    8. machine base 


                    SPECIAL ACCESSORIES 
                    1. turning tool set 
                    2. steady rest 
                    3. follow rest 
                    4. machine vice 
                    5. face mill cutter 
                    6. face plate 
                    7. back plate(φ160/φ200) 
                    8. four-jaw chuck(φ160/φ200) 
                    9. step block 
                    10. rolling center

                    产品详情:
                    大利彩票